The Kebony Deck Boards Installation Guide (PDF) provides detailed instructions for installing Kebony profiles #2522, #2226, #2637, #2638, #2558, #2746, and #2747. This guide outlines framing requirements, ground-clearance rules, ventilation expectations, stainless-steel fastener selection, edge-fastening options, sistering techniques, and profile-specific fastening instructions.
The manual begins with general guidelines, emphasizing that Kebony is a Dually Modified™ wood designed for outdoor use above ground. Page 2 explains that while Kebony is more stable than traditional softwoods, it will still swell and shrink slightly with environmental changes. Installers are instructed to prioritize proper ventilation, avoid moisture traps, and ensure clean drainage around end grain.
Safety requirements (page 2) highlight the need for protective equipment and compliance with local building codes. Storage guidelines on page 3 recommend keeping boards covered until installation and avoiding direct sun exposure before construction to minimize uneven fading.
A full ventilation table appears on page 6, outlining two installation conditions:
• **Standard 12″ minimum ground clearance**
• **Low-height decks from 1.5″–12″ above grade**
The table (page 6) details airflow requirements, soil covering, drainage slope, ventilation grates, fascia clearances, and airflow gaps between the deck surface and vertical structures.
Key fastening rules begin on page 5. Installers must use only 304 or 316 stainless steel screws, pre-drill all holes, avoid drilling within 1″ of edges, and maintain ¼” spacing between boards when face-fastening. Sistering details are clearly illustrated, showing how to separate joists 1/8″–4″ to encourage airflow and prevent moisture buildup. End-grain should always be sealed with wax to reduce cracking.
Profile-specific fastening instructions begin on page 7, covering face fastening, Pro Plug® compatibility, and CAMO edge fastening for select profiles. Page 8 includes special fastening rules for #2637, #2638, and #2747, which must be face-fastened with specific spacing and pre-drilling guidelines.
Download the full Kebony Deck Boards Installation Guide (PDF) for diagrams, spacing charts, and complete profile-by-profile instructions. If you need help planning a Kebony decking project, your TimberTown team is always here to help.
Download Resource
