The NewTechWood Locking Clips Position – Reference Guide (PDF) provides a quick visual overview of where locking clips must be used across NewTechWood UltraShield decking and siding systems. This one-page document is designed to help installers correctly identify mandatory locking locations to control board expansion and contraction while maintaining proper alignment.
NewTechWood’s clip-based attachment systems rely on a combination of floating clips and fixed locking clips. This reference sheet highlights key areas where locking clips must be used, including the first board, center locking points on long runs, butt-joint locations, and transition spots where expansion and contraction need to be controlled. The guide also illustrates recommended clip spacing patterns and the structural support required behind the locking clip.
Whether working with US07/US01 decking profiles or US09 and UH46 siding boards, installers must lock only one point per board length to prevent buckling. This sheet visually reinforces that requirement and clarifies where floating clips should be used to allow natural board movement.
Because proper clip placement is one of the most important factors in the long-term performance of NewTechWood products, this PDF serves as a fast, jobsite-ready reference. It can be used alongside the full installation manuals for decking, horizontal siding, vertical siding, ceiling panels, and the European Siding System.
Download the full NewTechWood Locking Clips Position Reference Guide (PDF) below to confirm locking clip locations before installation. For help understanding clip spacing, board expansion, or full installation workflows, the TimberTown team is always here to help.
Download Resource
